Adding Content to DazStudio 3.0

On my DELL M6400 running Windows 7 64 bit edition, I found out that I need to first map a network directory to drive first, and then add the content entry in the preference of Daz Studio 3.0. Otherwise the serach content feature won't pick up the content in my repository.

ZBursh 3.5 R3 keeps crashing

I was always interesting in learning to use ZBrush. The problem is that I always have negative experience with ZBursh. Like recently I am trying to get back to learning ZBursh again, but ZBursh 3.5 R3 just keeps crashing on my Lenovo X60T laptop. Since I have tons of other stuff to learn, so screw you ZBursh, and I'll get back to you say ... errr ... 6 months later.

Manga Studio EX4 crashed when drawing on a document with 3D object, and then, the solution

I am learning to use SketchUp Pro to define a scene and then import into Manga Studio EX4, that way I can use a single scene in multiple drawing, saving me a lot of time. (Actually, the real reason is that I am suck at drawing perspective.) So when I found that Manga Studio EX4 kept crashing whenever I use my stylus to draw something on another layer with a 3D object in it, I was desperate.

After wasted half an hour keep trying and trying, I eventually rebooted the machine, and found that the problem went away. And then I looked back and remembered that I have Sketchup Pro 7 running WHILE using Manga Studio EX4. Maybe both programs fighter for OpenGL access. Anyway, at least the problem seemed to go away after the reboot.

I also found that after I render the 3D object as a raster (and exist as "3DLT Rendering Folder") I can manipulate indivdual layer. This is important because I want to touch up the rendered 3D object so that they don't look so stiff.

You know what, F you Sketchbook Pro

After try and try, installing the latest Sketchbook Pro, and I still get that mouse/tablet freezing problem, so screw you Sketchbook Pro. I am going to use Photoshop CS4 instead, which I tried, and works pretty well. In fact, let me try Painter 11 too since Painter support canvas rotation.

Errr maybe the problem is not Daz Studio after all ....

To my surprise, stopping the Daz Studio doesn't seem to resolve the SketchBook Pro 2010 hanging problem. In fact, I now start to suspect that it's the "Rotate Canvas" feature that caused the occasion hanging.

So I installed the lastest Release 1 SP2. The version of the original one is:
SketchBook Pro 4.0, 2009 02 23 17 34 (Build 297361)

The new one, on the other hand, is:
SketchBook Pro 4.1.2
2009 12 09 02 03(Build 321671)

Let's see if I still got the problem.

Daz Studio 3.0.1.144 makes my tablet chock

Daz Studio 3.0.1.144 continue having this problem: when running, it will cause my Wacom Tablet to momentarily stop function for a few seconds. This is very annoying when I try to use Daz Studio as the model while I do some sketching on SketchBook pro. Granted I can first render and then use the rendered image as reference, it sure would be nicer if Daz Studio doesn't have that problem.

So Painter 11 is still not Tablet PC friendly

So I installed Painter 11 (using the trial version, which worked for me), and found that running it on my Lenovo X60T doesn't give me any pressure sensitive support. So eventually I had to install the Tablet PC enable driver, which is PenTablet_505-7.exe. Now Painter 11 recognize the pressure sensitivity.

However, that does have some side effect. For instance, SketchBook Pro 2010 was affected as the pressure sensitive level changed. I would love to keep the original setting, but supporting pressure sensitivity on Photoshop CS4 and Painter 11 is also pretty important. I feel like I am simply picking the best of both evil.

So this is how you update Daz Studio 3 Advanced

I was frustrated by my Daz Studio 3 Advanced kept crashed after saving a scene, and then puzzled by how I can update Daz Studio 3 to the latest 3.0.1.144. It turns out that all I need is download the regular Daz Studio 3.0.1.144, run the installer (which during the process will uninstall the older version), and once it's done, run the application and enter the Advanced serial number. That's it. There's no separate update exe.

How to properly export page from Manga Studio EX4 to Photoshop

Each graphic tool has its own strength. So I use Manga Studio EX4 to do inking, and then I export the inking result to Photoshop CS4 and do the coloring there. To make sure that the inking layer has it's own layer when opening inPhotoshop, make sure that you export the file properly with these setting:

• In Manga Studio EX4, select [File][Export...][Image file...(In Pixels)]
• In "Export Image" dialog box, select "(x) Output as actual size" as Output Size. For File Setting, choose "Photoshop" type. Click [Settings...] to get to the "Photoshop settings" dialog. Choose "(x)Keep Layer structure for Output" option, check
  "[x] Ouput layer set (Photoshop 6.0 ot later)" and select "(x) Up to 5 Layers (Photoshp CS or Later)".

That's it. Happy Inking and coloring!

Done, resolved the tablet stylus delay problem!

After spending some time to investigate the issue of which I found my Wacom Graphite 4 tablet had pen stroke delay issue with using with Manga Studio EX4 and Photoshop CS4 (plus lossing the touch sensitive ability) under Windows 7, I found out a perfect solution to resolve the problem. Simple disable the "Flicks" feature will get rid of the delay problem.

To disable tablet stylus "flicks" do the following:

• Under Windows 7 Control Panel, select "Tablet PC Setting" and find "Pen and Touch". Or better yet, search "Pen and Touch" in Windows search box (just pressure the Windows key to bring up the search box).
• Under "Flicks" tab, unchecked the "Use flicks to perform common actions quickly and easily"
• In addition, you can also disable "Press and hold" and "Use Your finger as an input device" (particularly when I don't have a touch screen on my desktop) to make your stylus even more responsive when drawing.

Slightly tablet delay when using Manga Studio EX4 under Windows 7 final release

I just realized something kind of strange: I sensed and saw a few mini-second delay when using my Wacom Tablet Graphite 4 with Manga Studio Ex4 under the Windows 7 Final release. I didn't have the same problem when using the Windows 7 release candidate. Odd.

But then you could argue that when you ink your manga, you usually don't do quick sketch and ultra fast strokes. I tried carefully inking, and the delay doesn't seem to affect my inking process.

Maybe I just have to deal with it by inking properly.

Finally, a nice way to export PNG or JPEG from Adobe Illustrator CS4 honoring the artboard

By default, when you export from Adobe Illustrator to other raster graphic format like PNG or JPEG, it will export ALL the graphic elements on the document, including those that are not on the artboard. In most of the case, at least for me, that's not what I want. I want export to honor the artboard area by only exporting those without the artboard boundary.

It turns out that it's something very easy to be done in Adobe Illustrator CS4. All you need to do is check the checkbox "Use Artboards" on the Export Dialog.

By the way, I am working on moving some artwork from Illustrator to PowerPoint, and found out that:

• Illustrator exports PNG as raster, which is not too bad.
• PowerPoint 2007 takes PNG pretty well.
• PowerPoint 2007 does NOT take Illustrator file directly.
• I hate the default way of inserting picture in document. It will automatically put it in the content box. So I have a habit of deleting the title box and content box on a default PowerPoint slide first, and then import the PNG. As long as the PNG document size ratio fit the PowerPoint Slide size ratio, PowerPoint will automatically fit the slide. I found this feature very helpful.
• 
  

Gotta do it at least once

This is very critical for me to learn stuff: I GOTTA do what I learned at least once. Merely read or watch the tutorial so something do me simply NO GOOD until I actually do something once.

Enable Viewport Shadows in 3D Studio Max 2010

I was following the tutorial "Introduction to Lighting in 3DS Max" chapter 6, and was
puzzled by the fact that the instructor can turn on the "Enable Viewport Shadows Selected" feature while I couldn't.

After poking around and got some hints from this web page, I found out that i can turn on viewport shadowing by:

1. Right click on the viewport quality (locate at the upper left corner of the viewport.
2. Select menu [Lighting and Shadow][Enable Hardware Shading]

And instantly the shadow map shading start showing up in the viewport.

Freeze but not trun in gary in 3D Studio Max

After trying to get into 3D model and animation, I realized that there are 2 things that is very critical whenever you try to get into a 3D application: navigation and organizing. In fact I found them more important then model, or learning all the crazy tricks. If you don't understand how to EFFECTIVELY (not use barely understand) navigate and organize your 3D world, you will be in great frustration and eventually give up, just like I did several times before.

I got the navigation on 3D Studio Max pretty much nailed down, except that I found that the camera thing kind of hard to get used to. The problem I had, though, was that I had problem locking some object while manipulating other objects. It turns out that in 3D Studio Max they don't call it Lock, but instead they call that feature "Freeze". Also, you need to make sure that the "Show Frozeb in Gray" if you want the frozen object to show as usual. For instance, I am playing with lighting now and definitely need to object to show in their regular way.

Also, you may need to get yourself very familiar with the "Select From Scene" listbox and "Manage Layer ..." list box. These 2 listboxes allows you to access object even when they are frozon, hidden and such. Familiar with these 2 boxes save you a lot of headache down the road.

Balloon overlap tricks for Manga Studio 4 EX

I was puzzled by the fact that in the Manga Studio 4 EX quick start document, it showed that 2 overlapped balloon merged into one. However, the feature was not documented in the documentation. Luckily some good souls on the Net figured it out and shared it. Here's the excerpt from GreenLaw:

To do this in MS 4 you must first create a new layer by clicking the New Layer button in the Layers window. Make sure you use the New Layer command and not the New Folder Layer command. When the dialog appears, select Text Folder as your layer type, and then click OK. You can then drag your text balloon layers into this folder. When you collapse this folder, overlapping balloons will appear 'merged'.

Thanks, GreenLaw!

Strange problem with Extrude in Maya 2009

I had a strange problem using Extrude in Maya 2009 while following the "Lynda.com Autodesk Maya 2009 Essential Training" movie "0306 Using the Extrude tool". Inside of allowing me to move the gizmo handle in order to move the extrude face, it just get "stuck", and only allow me to rotate amount the surface. Maybe it was some setting that I made before, but I tried and tried and couldn't get it working. Finally I had to close the application and start it again. That seem to solve the problem.

Little big and my fix for Manga Studio 4 EX

Manga Studio 4 EX is such a big improvement for Tablet PC. But I found little annoying problem: everything when I show/hide the pen palletee, the tablet PC will go haywire. My solution: create short cut to zoom in and out the page. Everytime I do zoom in out, the problem get resolved. Strange but at least I found the way.

CSS wasted me 4 hours this morning

It all started when I tried to add an item at the upper corner of my web site. And then it turned into a 3+ hours of diagnostic session.

The problem is the fact that while to page looks OK on Internet Explorer, the page was messed up in Firefox in the way that the rollover button were all behavior incorrectly. After some diagnostic I found out that the margin-top value was messed up on Firefox. After tracking eventually I found out that the way how the float and position (absolute, relative) didn't work out as I expected. On the top of that mess, I employed the trick that allows me to keep the text I styled with image on the page. It's such a mess.

Eventually I got it fixed by using span instead of using div to host the entry. It actually makes more sense for semantic point of view. I think the lesson I learned is that instead of just trial and error and hope that things look correct on the page, I should spend more time to actually understand every single CSS keywords and make sure I understand the implication of using every single one of them.

Remove ruler from Manga Studio EX3

I spent a little while trying to figure out how to remove ruler as I accidentally drew some rectangle rulers. As it turns out all I need is use Object Selectors to select the items and then hit delete button.

Re-branda web site

I was helping out my friend to re-brand her web site. The biggest challenge to me is to untangle all the style that was embedded within the pages in form of online style, layout done using HTML tables, HTML tags that was not closed properly and so on. That is a boring and tedious work, but it has to be done before I can do any real design work .

At that almost took me a whole day of time.

For my friend who tries to repackage other's content and resell it

I don't think reselling web page/site template is that easy. People have higher expectation on sites, and dynamic contents require setting at the server site. If you don't have that kind of knowledge, the user may return your design and ask for refund because they have problem putting them at their site and you can't have resolving the problem. It's less than just pretty static web page these days.

So instead of aim for reselling something for cheap, you really should package it as a total end to end service. In this economic downturn, people are looking for solution that yield revenue directly instead of just a pretty face. Try leverage some existing service like Blogger and FaceBook, telling you client that you can help designing sites that give them a unified message among all these dynamic sites and at the same time providing services to costume (like, for instance, using Twitter to provide service or product delivery status).

That, of course, it much more than just grab some freebie templates and then reselling them. But hey, if it's easy, everyone should have done it already.

Another thing: you may be violating copyright if you just garb stuff online and then resell them, even when those content are free. There are different kind of licensing governing so called free content, like Creative Common or GPL. Make sure you know your right and obligation before you repackage others creation online. You can actually get sued.

Making of photo composition

Last time I create some photoshop work for a poster I worked without writting down what I did. The result: I totally forgot what I did and couldn't replicate the result.

This time I won't make the same mistake.

So here's my challenge, my client gave me a bunch of JPEG files as the source of a photoshop composition being used in a poster. The problem? Most of the files are very poor in quality when using for print. Also the are all in different color tone.

So my plan was trying to "normalize them" by applying a water color filter. I also bumped up the resolution of the composition to 300 dpi so that when the filter got applied, the bitmap will look smooth on the printerd poster.

But then my client told me that all he cared was seeing those photo clear. Damn, so mcuh for doing experiment for him. Well, actually that could be a good thing for me, because the loading, saving and rendering time of applying the filter is so freaking time consuming even on my fast machine. So no filter means much faster load time. Great for me.

But I still need to resolve the color tone problem. Luckily I found a YouTube video with title "Photoshop Tip - Combining Photos & correcting color" (basically it's about using "Curve..." to add color to the photo). I followed the instruction and got some good result. However, there were some photos that I still need to twist a bit. I use Color Balance to twist the color to make it more yellow. And then I use "Brightness/Contrast" to future adjust. The result looks OK from my persepctive. I know I still need to do more exercise to get better on the whole color correction thing, but this is at least a start.

Oh, Adobe Illustrator CS3 crashed on me once today, which totally pissed me off. And it seems like I was not the only one who complain about CS3's stability problem when I serach around the Net.

Importance of documentation

I was disappointed by myself that I couldn't replicate something that I did 2 weeks ago because I forgot to document it down. I better do more documentation.

So that's how I change layer name in Manga Studio Ex

Sometimes to answer of a problem is so obvious that you almost want to chock yourself.

So I was trying to figure out how to change layer name in Manga Studio EX 3. I right clicked on the layer in Layers windows and couldn't find an entry called property. Fustrated, I went to the Net, and eventually find out that there's always a Properties window available. All you need to do is bring it up by pressing [F7]. There you are change the layer name is whatever way to want.

Personally I think 2 things need to be changed in Manga Studio regarding to this issue:

• Add a property menu in right click menu on layer in Layer window.
• Renew Property to "Layer Property"

But then at least I found the answer.

Common mistake when using Toon Boon Studio 4

During my re-learning process, I found out that I made some mistakes here and there when trying to create a cut out animation. So I think I better write down those tidbits cause I may probably make the same mistake next time I pick it up several months later.

• When animating your cut out animation, make sure that either "Tranform" or "Rotate" button are selected. Otherwise the movement you made will be just on the first key-frame.
• Check the preference and make sure that "Create Constant Keyframes" checkbox is OFF, unless you totally don't want the in-between automatically generated for you. After all, you can always set and reset the in-between nature by first selecting the in between area, and then right click to select the segment nature (constant or non-constant)
• Animation only happeneds on the peg. So make sure you set the hirechachy so that everything you want to animate is sitting inside a peg.
• You may wonder why all the parts do not show up on the screen after you have the hireahacy set up. Mostly that's because you are at the "Drawing View". Switch to Camear view and you will see all the parts.
• Save frequently. My Toon Boom Studio 4 still crashes very once in a while.
  

Here's a typical work flow of creating a cut out animation using Toon Boom Studio 4:

• Create a new document. I use 800x 600 camera size
• Go to Exposure Sheet. For each part of your cut out, create a new "drawing" at Frame 1. Remember to name your drawing properly. That makes organizing hireachy much easier.
• Create Peg, put drawing into the peg, with right hireachy. I name peg with "P-" prefix
  
• With "Rotate" selected, select each Peg, and move the pivot to the proper location (make sure indicators are all green.
• Save, before animate anything (that way you have a base to go back to)
• Collpase all hireachy. On the very top Peg, drag the first frame all the way to the final frame. Now the timeline should fill up by a blueline, with all the cutout part.
• Go ahead and animate. But make sure that (1) you select the peg instead of the drawing (easier to be done on the timeline), (2) Make sure either "Rotate" or "Transform" tools are selected (3) Use the solid black square handle to move the rotation.

Finally, try create a static drawing to layout the route of the motion to make sure that it's smooth.

Relearning Toon Boom Studio 4

I opened Toon Boom Studio 4 and tried to do some simple animation, and found out that I already forgot a lot of basica concept of how Toon Boom Studio works. Fortunately I downloaded some tutorial video back then. And those video really helps me to pick up what I left off all over again.

Manga Studio 3 EX blue, and then a happy ending

I haven't been using Manga Studio 3 EX for a while. The last time I used it was way before I got the ATI HD 4850 graphic card and the DELL 24 inch UltraShape display as my second displace. So when I found out that Manga Studio went nuts when I tried to use my Wacom Graphite 4 8" x 6" tablet with it. I wan't too surprise. What surprised me was the solution.

The moment I encountered the problem, I went ahead and downloaded the driver to update the Wacom driver to 5.0.8.6. Well, does NOT solve the problem.

Then I went to Smith Mirco's site and found that there's NO UPDATE on Manga Studio 3 EX... great.

Finally I found my rescure in CP Forums. Someone found out that by removing Wacom Tablet Perference, reboot, and set the preference again, it will resolve the problem. But how do I remove the preference?

Well, Wacom provided instruction to remove the Wacom tablet perference. I basically followed it, but went 1 step future by removing both Tablet.dat and Pen_Tablet.dat. After removing all these perference files, reboot, and then set the Tablet setting, Manga Studio works again. In fact, I am continue using my dual screen setting with no problem.

Poser vs Daz Studio

Comparing with Daz Studio, Poser (and Poser Pro to that respect) is like a lousy elder-brother who has talent but horrible people skill, while Daz Studio is an aggressive younger one who only inherited a few talent from the heritage but does those several things very well.

May be that's not a particularly good analogy, but the relationship between Poser and DazStudio is just too strange. And to fully take advantage of all the Poser format content, you need to have a good grip on both environment.

Ironically. while Daz Studio takes Poser scenes files in most case, you can't do the other way around opening Daz Studio file in Poser. So there's an incentive to do most of the work on Poser, until you found out that the posing environment in Poser is so much inferior comparing with Daz Studio. Daz Studio is definite so much easier to work with.

And then there's an issue of organizing material. Daz Studio has it's own little database in SQLite format which to me greatly enhance the workflow. Unfortunately Poser, even when pointing to the same runtime folder. Thus I am struggling about whether I should reorganize my Poser content physical folder structure so that both DazStudio and Poser can benefit the content structure. I am afraid that this procss would that me several days to complete, and even then I probably won't know for sure that I have all the content at the right place. ,

I already spent/wasted most of my time yesterday trying to get myself used to Poser Pro. I am not srue if I am willing to spent another day to just doing mechanical stuff today ... sigh ...

Wait and wait

I feel like I spent a lot of time in my life to wait for stuff. Especially waiting for Daz Studio to load up. Hopefully the graphic card that coming will ease that part of the pain in my life.

Crossdresser 3.0.1 has it's limit

I was overjoy figured out how to use Crossdresser 3.0.1, but then there are quite some limitation that I am to live with:

- Crossdresser doesn't do well on converting shoes or any sort of footwear.
- Crossdresser may not always convert clothing perfectly even when I do all the right setting. The Mongolian gown virtual cloth I brought is one of the example.

In fact I need to check around and see if there's others who have the same problem as I do.

Finally really figure out the power of CrossDresser 3.0.1

I finally figure out how to use CrossDresser 3.0.1 effectively. The sad part (about me) is that the application is supposed to be pretty easy to use, but because of my stubbornness of not reading the manual in the first place, and then made some wrong assumptions, as the result it took me almost a day to get the convention going to way I want to go.

My biggest mistake was that I forgot to set the "From" drop down. Thus the converted address were always not conformed properly. And I kept banging my head wondering why result was so different from what I expected.

Second, I didn't realized the Vicky 2, Vicky 3, Vicky 4 actually means Victoria 2, Victoria 3 and Victoria 4. Thus I was kept puzzling about how I could set the target or source to Victoria, since the drop down only has Vicky 4.

Let me continue my conversion journey. This is great. Now Miki 2 and Gina (Preteen Girl) has more costumes to wear.

Daz Studio 2.2.2.20

2.3.3.15 is just too darn crappy! It crashes time after time when I try to do something as simply as reorganizaing the catalog. I really couldn't stand it any more. So I am rolling back to the 2.2.2.20 and see if it's any better.

Used 2.2.2.20 for several hours. No crashing ... good ...

Big mistake with Daz Studio 2

I found out, today, that I made a big mistake regarding to organizing my Daz Studio resources. Instead of putting all my content files in Daz Studio's main content directory (under Program Files), I put them in the Q drive of my desktop machine. My rational was that it will give me flexibility of detaching the content from the main application, in case I need to rebuild the OS partition.

The problem is that by doing so, it makes backing up the whole Daz Studio environment difficult. After I installed the application, I started to use the Daz Studio database to organized my content. So now some reference in the database pointed to C: drive while others are pointing to Q: drive. That means if something goes wrong, and I need to replicate the environment, I have to put some content in C:, and then some content in Q:.

I also realize that it's impossible to consolidate folders. If you move the folder, Daz will lose track of your content, and all the work you did on organizing the content will be lose.

So now I kind of have a mess on hand, which is really not the end of the world, but I definitely will do it differently if I can do it again.

Taking back my words :-<

After trying it a bit more, a realized that Metasequoia 2.4.8 really isn't as Tablet PC friendly as I expected. Oh well.

Metasequoia 2.4.8 ,,,, Tablet friendly!

Most of the 3D modeling application I used so far has some serious problem with Tablet PC. Navigation on the screen (like move, scroll) usually goes crazy when I use stylus. That's why I was slightly surprised to find out that Metasequoia 2.4.8 does not have that kind of problem. Sure I need to play a bit more, but it seems very promising.

Metasequoia + Texture mapping = knocked me out for 10 hours

I fell into sleep because was the struggle with a 3D application called Metasequoia. Getting it to do basic modeling it's OK. In fact it's almost fun. However, I have major hardtime using it to do Image mapping. After struggling with it for more than half a day yesterday, I decided to roll back from the current version (2.4) to a much older version (2.1 beta). At least there are some tutorials online that I can follow for the older one.

Rendering

Here's I am testing various way of casting shadow.

Finding clothes for Gina

It all started when I found a 3D model that looks very much like my friend. So I wanted to pose some scene using that model called Gina. That's when I realized that the model is derived from Daz Milliumn PreTeen model, and that model does NOT have a lot of ready made hair, clothing and props to use with.

I resolved them problem by using Aiko 3's hair, and then decide NOT to apply "Fit To". That allows me to free to adjust the positioning of the hair. All I need to do, at the end, is move the hair to the head level of hireachy of the model and then all becomes fine.

Next, I need to make some clothes for Gina. Luckily, there's a software called CrossDresser 2.5.1. So I can use the tool to convert clothing form "Aiko 3" to "Preteen Girl". The conversion is not perfect, and it's a bit like trial and error. But at least there is a way. Each conversion takes from 15 seconds to 4 minutes.

After some twisting here and there, I got a ballet scene setup. But after I rendered, I found that there's no shadow casted on the floor, which makes the scene looks very strange. That's when I realized that I need to adjust the "Shadow" setting of my distantlight source. I picked "Raytraced(Software Only)" as Shodow Type and found that it takes A LONG TIME to render a scene. In fact, it took 20+ minutes to render the scene, and it doesn't look particular better than the "Deep Shadow Map version", which takes much shorter time to render.

Still couldn't find a converter to convert .bip to .bvh

I spent almost 2 hours and still couldn't find a way to convert .bip (motion capture file format for 3D Studio Max Character Studio) to .bvh (something Daz Studio can use, sort of). Some mentioned a way, but I don't have that motion builder application. What a bummer.

Faceshop, wow

I accidentally came across this Daz Studio plug in called FaceShop. The Basic version is now free, but it only works with version 2.2.2.17, which is still in beta right now. So I better wait for the release of 2.2.2.17 before I mess with it.

Finally, Aiko 4's eyes are not messed up

I was struggling for 2 hours (how many times did I write an introduction of my blog like this) with Daz Studio 2.2 trying to figure out why Aiko 4's morph was not working. Result: Aiko 4 got a very tiny eyes, and when I tried to slide the Aiko morph parameter nothing changed except the size of the model's head. That's a very creepy look.

I finally got my answer by reading the Daz 3D forum. Solution: Reinstall Aiko 4, and eveyrthing will be working fine.

3D Bridge for Photoshop is no longer free

I didn't really dig into 3D Bridge for Photoshop from Daz (for better integration between Photoshop and Daz Studio). To me, all I really care is find a way to export rendering image to a format that support layering, so that I can integration the scene rendered in Daz Studio into my photoshop work. And during the beta period, this is the only thing I used it for.

Guess work, the beta period for 3D Bridge is over. The final version has been released, and Daz started charging US$199 for it. I definitely don't have that much money, but I found a solution: .PNG file format. As long as I set up Daz Studio so that it render stuffs using .PNG, I can reopen the files in Photoshop, and integrate the rendering on my drawing. That's kind of my poor man version of 3D Bridge.

Found a clumsy way to import Lightwave 3D 8.5 models into Daz Studio

I enjoy using Lightwave 3D 8.5 since it works well in a "portable application" setting. However, I have hard time exporting or important anything to and from Lightwave to other format besides ".lwo". I tried making sure that all the plugins are being installed by:

• Opening Lightwave 3D 8.5
• Click [Utilities] tab
• Click button "Edit Plugins"
• Click [Scan Directory] button
• Point to the plugin folder

Still, when I check [Import ...] I got nothing.

So then I need to find a way to convert .lwo to .obj . Eventaully I found this solution:

• Open Shade 8
  
• Import .lwo file
• Export .obj file.

Once in .obj, I can open it in both 3D studio Max or Daz Studio.

Finally done with the costume

I spent several nights to prepare the costume texture for the girl on the left. It looks OK I guess.

[3D Studio Max] Show map in viewport

After you set image map in 3D Studio Max, don't forget to set "Show Map in Viewport" so that you can see your texture in viewport.

Get back missing toolbar icons in 3D Studio Max

Somehow when I open 3D Studio Max today, I found all the icons on the main Toolbar DISAPPEARED! Eventually I used the following way to restore the toolbar back:

- Select menu [Customize][Costume UI and Default Switcher...]
- Select "Max", "Default UI", click [Set] button.
- Restart the application.

Daz Studio 2.2 "Optimizing Images..." problem irritates people!

I was stuck with the notorious Daz Studio "Optimizing Images..." hanging problem this morning. It was very fustrating as even the newest version of Daz Studio (2.2.2.15) doesn't resolve the problem. I looked into the forum, and found this post and this post that might help resolving my problem. It's really irritating indeed.

Oh Stupid me about Daz Studio

Just found out that to refresh the bitmap, all I need to do is select [Refresh Images] from the menu. No need to reload the software.

More about Daz Studio

Daz Studio, being in version 2.1.1.13, is still not too stable. In fact, just a while ago, I had to reboot my machine to get Daz Studio up and running again. Still, this is the best I can get for have a virtual stage.

While I was working on preparing texture for 3D model, I found that the wrap Transformation tool is such a powerful tool. It's like of like the Mesh transformation in Illustrator, but not as fine grain. Still it's such a powerful tool that makes me wonder why I didn't use it before.

I also found out a while ago that I need to reopened the file again in order to get all texture loaded properly even after a texture JPEG file got updated.

[Adobe Illustrator CS3] Check Transparency before converting image to mesh object

Last night I made a mistake and turned an hour plus work into something not so useful.

Basically I try to put some real world clothing pattern on a texture mapping template I created on Adobe Illustrator CS3. Everything went well. But before I convert a texture (JPEG image) into mesh object so that I can wrap it on a texture mapping template, I changed the image's transparency BEFORE converting to mesh object. That's NO NO because after the convertion. The low transparency became 100%! That means I can never get back to the original transprency.

So next time I should remember to FIRST convert a bitmap into mesh object BEFORE I change the transparency value.

No Tiling on Daz Studio

Just found out that Daz Studio does not support Tiling Texture. Everything has to be done in UV Mapping style.

Mesh

Long time ago I wrote an article about how to turn JPEG into mesh object in Adobe Illustrator by selecting "[Object]->[Envelop Distort]->[Make With Mesh...]" command. I just found out that on CS3, I need to click the [Embed] button to embed the drag-and-dropped JPEG file first before I can access the "Make With Mesh" menu.

Found a solution to get rid of reflecting eyes

Thanks for all the reply!

The solution is selecting the "5_Cornea" surface, and then set the "Specular, Glossiness" to 90%, and boom the ultra reflective eyes are gone. Awesome.

Found out how to save expression in Daz Studio

I have to say that I am pretty piss right now as I wasted 1.5 hours trying to figure out how to save Expression in Daz Studio 2.1. Eventually I found it. but damn it for lossing my 1.5 hours.

Basically I am following the instruction at Daz web site, but since that article was written for older version, some minor stuffs was changed.

Before saving, you should create a folder to store your own setting. I have a habit of putting my own Daz Studio content in place other than the application installed directory. However, make sure that the content directory you used to store your custom expression is under "Daz Studio Content Directories" instead of "Poser Content Directories". I made that mistake and thus my saved expression was never show up.

If everything done right, you should see the folder name you created to store expression showing up at "Uncategorized" group.

If you don't see your expression showing up, check the following:

• Make sure the your content path is in the preference. For some stupid reasons sometimes the path will disappear. And you have to add again, so do check.
• Do "Search for Content" so that the UI can be refreshed. That should load your expression.
  

More tidbit on saving expression:

• Setting up your active screen in a way that you want the icon to look like. I perfer using "Front View", and how the head zoomed in so that I can clearly see the expression.
• When saving, simply:
• Navigate to your Daz Content Folder.
• If it's a new category, create a new folder and save your file in it.
• On "Save Pose Preset Options", take the default, which is "Current Frame Only" and "Record Custom".
  
• MAKE SURE you check the check box for the character (like Victoria 4), otherwise all your effort will NOT be saved even though the icon looks good.
• Also MAKE SURE that you check the right sub-hierarchy. Otherwise the pose you save may affect the whole body. For instance, if you just want to save the facial expression. You see check the "head" check-box in the hierarchy ONLY.
  

Finally figured out how to move multiple objects in Daz Studio 2.2

The method is much simpler than I thought. Simply create a null object as a place holder as your group. When you need to move something as a group, move those item into the null object. That way, when select the null object (from scene hierarchy) you move the whole group of object around. Simple as that.

Now if I know how to save facial expression .....

crashy Poser 7

I just updated Poser 7 from 7.0.0.63 to 7.0.2.132 by applying Service Pack 2. Hopefully it will crash less often.

Continuous struggle with Poser 7 (to make costume for Daz Studio characters)

After weeks, I am stupid struggling with making costumes for characters in Daz Studio. Neverthesless, there' some slight progress, and that's why I am trying to jot down some notes for myself.

• Definitely check out the Creating Conforming Clothing For Poser Figures article at Smith Micro web site. I will definitely stuck for long long time without that article.
  
  
• Definitely need to save constantly. Poser 7 seems very fragile when dealing situation it didn't expected. While I was still in learning mode, I had to constantly start Poser 7 again after doing something not in the "right way".
  
  
• When creating bones, make sure that you know what is the "base" of the new one that you are about to create. Haven't said that it's actually no big deal for making mistake since you can always manipulate the hierachy by bringing up the hierarchy window, and the drag and drop the bone structures.
  
  
• Sometimes you make create more bone than you need. Delete them first before naming, or otherwise some funky thing may happen.
  
  
• AT first I found out that it's much easier to name the bones right inside the Hierarchy window than using the property window since the property window shows both the name and the internal name, and I was like "why the hell should I care about the Internal name"? And then later I realized that the Name is the display name, and it's the internal name that has to match the group name. Very critical a step.
  
  
• Remember the click the "Auto Group" button at the end of the rigging process, otherwise the costume will act like it's breaking apart.
  
  
• Make you study the corresponding joints you try to conform with before doing rigging. All parts have to match, or otherwise you will get strange result. You can do it by loading the figure in Poser 7 and then go to [Setup] area. For example, for me, I load Aiko from the library at "[From Original - DAZ Aiko 3]".
  
  

I still haven't done with my model yet, but at least I stepped enough mines to learn my way. Enough pain for one day, and I need to move on to do something else.

Poser 7 not portable

Well, just found out that Poser 7 is not portable friendly. But I have to install it in order to creating clothing for Daz Studio.

Question about making clothing

Here's where I posted my question:

------------------------------
Information about making costume for Daz Studio using 3D Studio Max

I have problem finding the props and costume for scenes that I want to create in Daz Studio, and decided that I should start creating props and costume using 3D Studio Max. I have no problem creating props, but I don't know how to create costume.

I found some instruction about creating basic clothing with 3D Studio Max, but it seems to rely on Poser to do the fitting with Cloth simulation. Is it a must to have Poser in order to create clothing for Daz Studio? Any information about creating clothing on 3DSMax (I am using version 9) for Daz Studio?

Honestly I am a lazy person so if I could buy it I would. But I could find any Mongolian gown and other Chinese minority costume (like Xinjiang) for sale. Plus I love to contribute my work in open source just to show my appreciate for all the free stuff and help I got so far. And I love pretty costumes :->

Thanks!

Deecay

3D Studio Max 9 with BodyPaint 3D 3.111

My previous BodyPaint 3D experience was pretty bad. In fact, it was almost horrible. So I wasn't too thrilled when I started trying BodyPaint 3D version 3.111 with 3D Studio Max 9. It turns out that it was a much more positive experience then I expected.

Just like the older version, BodyPaint 3D 3.111 is a portable friendly app, as long as you have the valid serial number. But the magic comes when you installed the BodyPaint 3D plug in for 3D Studio Max 9 by copying the 2 plug in files into the folder (...\Autodesk\3ds Max 9\plugins). And then start 3D Studio Max 9, go to the [Utilities] menu, and click [more ...]. You will see 3DBodyPaint in the list. Click it to start the "utility". In fact, 3D Studio Max even picked up the BodyPaint 3D Path before I clicked the "Set BodyPaint 3D Path..." button.

To bring a model from 3DS max to BodyPaint, simply select the object, and then click [Export Selected]. BodyPaint 3D will be launched and your model will be loaded. To get back to 3DS from Bodypaint, just click the button at the left column.... (you will see the 3DS icon there).

The trick is that once you are in 3DS, you need to first create the material to paint on by click ...something ... at the lower right corner ... kind of like adding new layer in Photoshop. Once done, you can directly paint on the object. Pressure sensitive also works, but you have to explicitly check some checkbox at the upper right side of the screen.

So far I enjoy it. I just need to know more about how adjust the UV mapping map ... and ... a lot more. Hey at least I got some texture on my model.

There's lighting addon for Daz Studio?

I didn't realize that there's lighting plug in for Daz Studio, like Light Dome Pro and UberEnvironment . They could come in handy as I spent more time doing scenes.

Oh, also some very BASIC information about lighting in Daz Studio. I should spent sometime on this before spending any money on third party solution.

And then, more Daz Studio tutorial.

Oh, I also didn't realized that Blogger blog editing is totally functional in a pure text mode (with no bitmap on the page).

Importing old Poser 4 files to Daz Studio 2.1

I tried importing some old Poser 4 files to Daz Studio 2.1. It worked, but since the original model rely on a lot of parts from the Poser 4 application, so I took a look at Poser 7 and see if there's any same parts that I can use. It turns out that most of the Poser 4 files are available on Poser 7, but they are all zipped in .obz format. To turn them into regular .obj file:

• Rename the file extension to .zip.
• Unzip it, and a obj file will be automatically expanded as the result

That's it. Very simple. There were still a few texture files missing, but they affect my model, so I wasn't care about them at all.

Easily opening multiple catalogs in Portfolio 8.5

I just found out that I can open multiple Portfolio catalog files in Portfolio 8.5 by drag the actually .fdb catalog file into the Catalogs windows. However, no other kind of files, including shortcuts, are allowed in the batch you drop in, or else the multiple open won't happen.

This is very handy to me. Now I can search all my photos all the way from 1997 til now.

Daz Studio and Shadow

I realized one huge problem with the work I did on Daz Studio so far: the characters didn't cast any shadow. Even for the one that cast shadow, it doesn't look realistic enough. I guess I need to spend sometime to figure out the trick of casting better shadow.

Powerful skin feature

Ever since someone on the forum pointed me to the skin feature of Daz Studio, I found myself addicted to it, and realized how much possibility it opens up.

Not only I can specify the surface type (skin, plastic ....), I can also replace the primary color of the service. So a white gown can be turned into a pink gown with just a specify the surface color. Of course it's definitely not as natural as changing the texture file of the the selected surface.

That brings to something even more exciting: I can even replace the image map file associated with the surface. That opens up tons of possibility of totally changing the look of a model.

My next step will be trying out the shadow casting ability.

BodyPaint3D

I kept trying to learning BodyPaint3D to do texturing. But every time I try to pick up, the steep learning always put me down. In fact, I recently get back to 3DStudio Max 9, and hopefully the new version will be more texturing friendly.

Glossy Glove

This is how to make the glove glossy in Daz Studio.

Procedure:
- Select menu [Tools][Surfaec Selection]. Move your cursor around to figure out what area is in what name. In my case, it's 3_SkinforeArm and 3_skinHand.
- Opend the "Surfaces" tab. Within it select advanced tab, change the Lighting Model for the above two items to "Glossy (Plastic)".
- Render using software rendering.
- Done.

Lame hat

I think I finally have to admit that while SketchUp Pro 6 is easy to learn and easy to approach, it just doesn't have all the modeling capability I need. For instance, to create a 3D XinJiang hat with SketchUp, I ended up with this. Pathetic isn't it. So I am starting to mess with 3D Studio Max starting today. Wish me luck.

PVC Glove

I just posted a question about my straight PVC Glove problem at the forum:

So let me get this straight: to get the best rendering result, I need to use Software Render. But since software rendering doesn't use GPU on the graphic card, the only way to improve rendering performance is by getting a machine with faster CPU (or more CPUs)? Oh well, I am glad that I went for a QudaCore Processor when I got a new Dell 6 months ago.

Actually, I didn't know that use Hardware render (OpenGL on my graphic card) doesn't give me all the effect Daz3D provided until recently. But even then I couldn't seen to get everything right. For instance, I used PVCGear dress in this picture: https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEjCGYc2412BR8t-DPCNrRcV5mr1pAeRoGuNxr39_xcwjInWJ1jW6UDbme9bqidZvWd2DTgTSvr2E_wM2NWsktKbEzy3mWaCGl0TjO8AW_84OVc70QWo0a3j_vRtmeFaDICUle-J_Q/s1600-h/saveme.jpg

The dress was fine, all glossy. But the glove doesn't seen look as glossy. I tried both hardware and software rendering and seems to get the same result. What did I do wrong?

Opening Daz Studio database

It's so fun to use Firefox with SQLite plug in to view data in my Daz Studio 2.1 database! Just open the file "C:\Program Files\DAZ\Studio\resources\Content" and boom I see all the mapping. And great that now I know where to backup the database.

Database of Daz Studio 2.1

Thanks to the people on the Internet, not only I now know that the Daz Studio 2.1 Content Management database is storing at ..../Studio/Resources/Content , I also know that it's in SQLite format, and I can access it using a Firefox extension.

More on Daz Studio 2.0

I spent almost a whole day to mess with Daz Studio 2.1.1.13. Although I won't say now I am an expert, at least I can curse around the application and get some work done. Here's some of my finding.

• Most of the old Aiko 3 clothing doesn't work with Aiko 4 anymore.
  
  
• To import another Daz3D library, you need to add an entry in [Peferences][Directories], and remember to select "Poser Content Directories". I found out that if I use "DAZ Studio Content Directories", it won't work.
  
  
• But even after putting the right path, I still experienced problem as I could find the contents I newly installed. Turns out I have to click on the side way triangle located at the upper right corner of the Content panel, then select "Search For Content ...". Now you got a chance to refresh the content database. Once refreshed, you should be able to find your content.
  
  
• The search feature and organization feature provided by DAZ Studio 2.1 is simply awesome. Now finding content to use is so much easier, and I don't to remember where to find what in the application. I just go to the catagory I defined and boom there they are. Major break thru I would say.
  
  
• You definitely need to save frequently. The application tends to crazy once in a while for no good reason. The app is not unusable, but definitely can't be called stable. So save frequently.
  
  
• I didn't realized until late yesterday that (at least on my machine) only the software rendering will be able to render all the fancy effects and such properly. Maybe I just don't have a capable graphic card to do fast hardware rendering? Cause software rendering is, while not dog slow, takes about 30 seconds to a minute to render a scene.
  

• When you add hair (works like a wig to me) to your character, sometimes you need put it under the head node in the Scene hierarchy tree. This is particularly tree to those pre-Aiko 4 days hair. Merely doing Fit-to doesn't do the job (well at least that was what happened to some of the hair I tried.
  
  
• I successfully imported an object I created from SketchUp 6 into Daz Studio with all the texture mapping. This makes is much easier for me to create my own content.
  

On the other hand, there are some mysteries and things I need to learn:

• Somehow the glove I created using PVC-Gear didn't look as shiny as the sample rendering looks like. I wonder what I missed.
  
  
• I need to learn how to use light to create better effect.
  
  
• I need to learn how to use camera and animation to do some nice short animation short.
  
  
• I need to know where the compiled database of Daz Studio is being stored so that I can back it up and won't waste all the time I spent on organizing the content because of a harddisk crash.
  
  
• I need to figure out how to create my own dress.
  
  
• And finally, I need to create the XinJiang hat that I promised myself to create for days.

OBJ seems to be a much better format

I used Sketchup to create a XinJiang knief and think of using it with PaperVision3D, but I tried and tried and still couldn't get it load up properly. Meantime, if I export the model as .obj, then I can easily use it in DazStudio. Seems like .obj is a much better to use with. I am also glad that all the texture mapping I did on Sketchup got reserved in DazStudio.

Use Flash Player Standalone to debug Actionscript 3.0 Application

By default Flex Builder 3 will create a html for your Actionscript project, and then use it to debug your Actionscript application. I much rather use Flash Player Standalone instead, so I made the following changes in my project.

• Select [Run][Debug][Others...]
• In the "Create, Manage, and run configurations" window, uncheck the "Use defaults" checkbox. Now manually changes all entries to reference to ......swf instead of .... html . This will launch your default swf file player. If necessary, set the default application of .swf to the Flash Player Standalone application.
  
• Important: make sure that the standalone player you use is a Debug version. You will find it when you download the Flash Player 9 package form Adobe. Unzip the .zip and you will find the Debug version.

Using Flex Builder 3 to develop Papervision3D 2.0 (Actionscript 3) application

Here's the steps I used:

Prerequisite:

• Install "Install Flash Player 9 Plugin.msi" (from the Flash Player 9 Update package). That way, when Flex tries to language the application for Actionscript, it will launch your feault browser, and Flash Player 9 will be loaded properly for your 3D fun.

Steps:

• Launch Flex Builder 3.
• Create a new Actionscript Project
• In your project property, selecPublish Postt [Actionscript Build Path], then under [Source path] tab, select the folder of your 2.0 alpha source folder. In my case: "Q:/Apps/Development/Papervision3D/2.0 alpha/src"
  
• Write code.
• Compile

Papervision3D 1.5 (instead of 1.7 Beta)

Yesterday I directly grabbed the 1.7 beta from the subversion server. It was working fine with most of the examples found at this site, but there were some that didn't work out, so I thought maybe I should try the stable 1.5 version. So I downloaded it, explain it, put it my ...\Development\Papervision3D\1.5\src folder, and point the ClassPath to it. Well, those projects that failed .... still failed. But at least the successed ones still work fine, with slightly different behavior. For instance, in the 1.7 beta the system was not complained about the missing texture jpeg when needed, while 1.5 do complain about it.

I also need some offline documentation, so I downloaded the source with docs here.

My next stop will be spending some times with these examples, play with them, and see if I can made something useful out of them. That includes:

• Try loading the 3D models I created in SketchUp 6 Pro
• Try loading textures that are not JPEG (or check to see if it support transparency on PNG)

By the way, with my first attempt, I found out that when it loads JPEG, it doesn't do smart scaling (that preserves proportion), or maybe that I haven't found the proper API. Well investigation continue.

Flash CS3, crashed

Stupid Flash CS3 Pro Portable suddenly crashed while I was in the middle of messing the PaperVision3D Tutorials. Gee, what the heck is going on?

Papervision 3D

The new bizz in Flash town is Papervision 3D, a open source free engine that allows you to create 3D content for your Flash animation.

• Awesome blog about sites that created using PaperVision3D.
• A demo of undersea view, using Papervision 3D.
• Tutorial mainly on creating 3D texture mapping using 3D studio Max.
• More tutorial on making 3D environment texture using 3D studio Max
• Tutorial on PaperVision3D 2.0
• Easy to following Getting Started steps in FAQ
• A great site done with Papervision3D, showing off how 3D persepctive can be done.
• EXamples on PaperVision3D that you can download.
• PaperVision3D Source Code
• Main page on papervision3d FAQ
  
• More showcase on the power of Papervision3D
• PaperVision 2 is coming, and here's some tutorial

A few things to mention when I try out the engine:

• It WORKS with the portable version of Flash CS3 professional (Yeah, I can code 3D everywhere I go!)
• The most critical thing is to make sure that the "...as3\truck\src" is in the Classpath under Actionscript 3.0 Setting. To check it, go to [Edit][Preferences...][ActionScript Tab][Actionscript 3.0 Setting button...]. If the path is not there, add it. It should save with the application. I mean, even the portable version I have works.
• On a Flash document (.fla) page, you can associate a class to it. In fact, a lot of demonstration on PaperVision3D put code in saperate .as class file, so you shall get familiar with the approach. It's actually pretty simple:
• In your hosting .fla file, enter the document class name in the Properties tab.
  
• Save the .fla file if it's not been saved.
  
• In the SAME directory of your .fla file. create a text file with .as extension with the SAME name of your class.
  
• Click the pencil button next to Document class textbox, and it should bring you the an editor with your .as class file loaded.
  
• Put your code in there.
• Compile, test movie.
• The Flash CS3, by default, won't save the files you modified before compile your movie. So make sure you save your files before testing any movie.

A Toon Boom Animation done in one day

I really didn't anticipate that it takes me almost one day (actually it's from 5 pm to 12 midnight) to finish a simple Toon Boom animation, but it did.

Most of the time I spent was on figure out the best way to vectorized a few photos into vector art that is in manageable complexity for Toon Boom. The problem is that Toon Boom cannot handle graphics that are too complicate. 1000 vector lines seem to be the limit. Too much and the application may crash. There's always a temptation to try to preserver as much detail of the original picture as possible, but in reality I may need with lower color palette range, even though it means that I may need to alter the palette manually later.

I also found that .PNG jacks up the file size dramatically. Unfortunately there's no other option as only PNG support clean transparency. It jacks up the result movie size from 120K to 500+K .

Also, I cannot animate transparency of image like JPEG and PNG. So there's an incentive to convert graphic into vector.

Toon Boom cannot directly important Flash animation. So if I have graphic work done on Flash and need to move to Toon Boom, I have to export those art work into Adobe Illustrator format first. And even then Toon Boom may complain because the latest version of .ai exported by Flash CS3 is still too old for Toon Boom. My solution was importing the exported file into Adobe Illustrator CS3 first, and then export the graphic again into .ai (CS3) format. Now Toon Boom will be able to recognize the file and import accordingly.

It is very important to realize the difference between select and then rest of the transformation tools. Also pay close attention about whether you are animating the PEG or the artwork itself.

The color palette of the graphic imported into Toon Boom seems much shaper than the original palette while it is in Flash or Illustrator format. This is strange and may affect my final art.

On the plus side, I learned even more about Toon Boom and have a better understanding about it's limitation. It would be interesting if there's simply way to move Flash animation generated by ToonBoom into high end effect application, like After Effect or FinalCutPro Motion.

More Toon Boom Studio 4 notes

• To use Cutout characters, drag the item from library always to way to the LABEL of the time line.
• To remove a keyframe from the timeline, first collapse the animation, then rightclick on the timeline right on the top of the cell, and select "Remove Key Frame"
• When selection tool is selection, holding ALT key will turn the selection arrow into lasso, which makes it very handy to select items.

Daz 2.0 released

I just realized that Daz 2.0 has been released. So I downloaded and installed it on the top of my previous Daz 2.0 installation. YOu can't do portable for Daz since it only recognize the full installed version on the host OS. But at least it's nice enough to remove the older version while keeping all the previous setting. I also download some tutorial videos in order to learn Daz 2.0.

Strange things about Toom Boom 4

• Sometime the checker board will show up in camera will when I switch to different drawing elelment.
• When you adjust to pivot point for rotation, you should select the Peg of the element to adjust the rotation.
• those tutorial and exercise at the site are very critical. make sure you finish ALL of them.

Torturing my Toon Boom Studio 4

It took me a whole night and then I finally realized what the heck is going wrong with the pressure sensitve stylus support in Toon Boom Studio 4. It seems like that Toom Boom Studio 4 does NOT like the multiple monitor setting, and whenever I have multiple monitor setup, the pressure senstive stop work. Switch back to single monitor mode resolves the problem.

Great, now I can really get rid of Toon Boom 3, since the gradient color fill doesn't work when there's more than 2 colors.

But I am still struggle with how the peg think works with toon boom studio, and how the whole camera thing works. Maybe I just need more time to soak myself into it.

Frustrated by illustrators' Gradient feature

After reading this article about Gradient feature comparison between Photoshop, Flash and Illustrator, I am getting pretty pissed knowing that the Gradient transformation feature I need is not available in Illustrator. This really sucks, because everytime I need to do some art work with serious gradient manipulation, I have to use Flash CS3, and then re-import the items in Illustrator CS3. Sure I can use some tricks, but that's one more hurdle between my idea and my artwork.

Fustrated by illustrator

Learning Manga Studio EX

I was very much enjoying using Manga Studio EX 3, but I am sure that I there's still a lot of stuff that I need to learn. For instance, I tried to get rid of the blue border around the Word Bubble and Panel Ruler, and it took me almost half an hour to figure out that I can get rid of them by unchecking [View][Show Panel Layer Area] and [View][Show Text Layer Area].

But bottomline is that it's a great tool, and I'll continue invest my time to learn and use it.

Tablet PC as a art pad: not as great as I expected

The more I use my Tablet PC as an art pad, the more I realize that it's far from a great tool. Applications that specifically wrote for Tablet PC, like Alias Sketchbook Pro and ArtRage, works great with Tablet PC. But other tools like Manga Studio or Photoshop has serious delay problem. At least I thought it was just my machine, but after reading some forum posts, like this, and this, and also this. On my Tablet with Wacom Graphite 4, I have zero lagging problem. So I guess I should with using Tablet PC mainly just for sketching.

Tricky FLEXLM aw.dat setting for Maya 2008

I was setting up the aw.dat file by putting the Ethernet address in it,but the license application refused it. Turns out it's because I put in the address shown on "FlexLM license utilities", and it includes all three of my Ethernet addresses: one for my physical network card, while two for my VMWare virtual network card. Removing the virtual ones and put in only the the Ethernet address of my physical network card solved the problem.

Learning SketchUp 6 thru tutorial videos from SketchUp 5

It's very nice for Google to put up tons of videos for people to learn SketchUp. The problem, though, was that while the training videos are in version 5, the latest version is version 6, and there some UI difference between the two versions. For instance, the Display Setting feature become Styles. The color of line is now being set in Style setting instead of under the Window menu. No biggy, but cost me some time to find it out.

Photoshop CS3 with Wacom, problem solved

I installed Photoshop CS3 Extended and found Wacom working OK. So it's just the portable version that screwed up.

Photoshop CS3 with Wacom

Photoshop CS3 doesn't do pressure sensitive on my Wacom tablet! Could it be caused by the fact that I am using a Portable version?

CSS and Firework CS3 ... Sigh

Firework CS3 continuously having trouble running properly on my machine. After using it for a while, the left column of tool set will got all frozen for no good reason. I got so fed up that I quited using CS3 and using Firework MX 2004 instead. But MX 2004 has it's own problem:

• It doesn't provide as rich button transparency and shadow effect.
• It does not work with Aero class engine, forcing the UI to rollback to basic rendering.

On a totally different issue, I was being tortured by CSS for the last 24 hours. I need to keep fight and fight in order to get the result I want. sigh.

Found a way to do light lines.

Here's the effect that I want to create, and this is the answer.

Color Match Tutorial video for Photoshop CS2

This video is awesome. After watching it, I completely understand how color matching works!

Text wrap changed in Illustrator CS3

I was trying to following the instruction at this site to apply text wrapping, but then later I found out from Adobe official site that the command for Text Wrap was changed in CS3.

In CS3, to create multiple column, I should first select text area, then select command [Type] [Area Type Options...].

To create Text wrap, I first select text and wrap around objects (on the top of the text), and then select menu [Object][Text Wrap][Make].

Not too bad.

Illustrator CS3 Problems to resolve

When I do design, I hate switching between my right brain (for creativity) and my left brain (for logical thinking). So I tend to clear up all the technical issues about design before I move ahead my design work. Right now I have these tasks that need to resolve, some Illustrator CS3 related while some Photoshop CS3 realted:

Photoshop CS3 related

• Figure out how to color correct a bunch of photos before working on composition.
  Match the color in different images using Match Color command
  

Illustrator CS3 related

• Flow text around graphics.
  Here's the solution.
  
  
• Separate Text from text path
  Turn outs it's more like you select a corner handle, and the drag a text area. It's very much link to the text flow
  
  
• Hot Linkage between Photoshop CS3 and Illustrator CS3
  This is in fact MUCH EASIER than I thought, and works even with my Portable version of Photoshop CS3 and Illustrator CS3. Here's how you do it:
• In your Windows Explorer, make sure that psd file is associated to your Photoshop app. In my case I associated it to Photoshop CS3 portable.
• In Illustrator, select the imported psd object, and thus select the menu [Edit][Edit Original]
• Photoshop will be laoded, and so will your psd document. After you finish editing, save.
• When you get back to Illustrator, there will be a message saying that the source has change and ask for update confirmation. Accept it you got the modified psd object. Awesome.
  I also found an awesome new feature in Photoshop CS3 for creating DuoTone photo from color photo. Just select [Image][Adjustment][Black & White]. This gives you much better control on converting photo to duotone. Awesome.
  
  
• Add a think border to photo (from Photoshop)
• Short cut of Illustrator CS3. These short cust makes me feel like I am playing musical keyboard when working on graphic, but hell they are essential when I do a lot of graphic manipulation.
• Export Photoshop Path to Illustrator. This is easy.
  
  
• Copy layer between two Illustrator document.
  This is supposed to be the solution.
  But actually I found a better solution: use the [Edit] [Paste in Front] will paste the objects that I copied from one document to the new document and keep the position of all items.
  
  
• Create transperant Glass effect in Illustrator
  This site would be a good start .... keep searching ...
  
  
• Learn how to use Live Color and Color Guide effectively.
  This awesome video demonstrates what Live Color is about.
  
  
• Figure out how to consistent join two object
  Couldn't believe that I keep forgetting how to do it:
• Select the two objects you wan to join.
• Bring up Pathfinder, click the union icon on "Shape Modes"
• select menu [Object][Expand Apperance...]
• done.
  
  
• Find out how to modify effect history.
  Turns out the solution is pretty straight forward : Just bring up the "Appearance" Window and modify all the applied effects.
  
  

3D Studio Max 9 - At least it's stable

I was a bit frustrated by the 3D Studio Max 8 SP3. The application kept hanging up at some strange place. I finally got so feed up with it that I installed 3D Studio Max 9 and started using it. It seemed to work pretty well, and no crash so far.

Animation render problem with 3D STudio Max SP3

I experienced something strange like this: if I render an animation with 3D Studio Max 8 SP3, and in the middle of the rendering process I tried to something else, the 3DS8 application will hang up. So whenever I render a 3D animation, I have to leave the computer alone all the way until it finish the rendering. It's great that I have a spare laptop, so here I am, working on my laptop. In fact, I think I may just install 3DSMax on this laptop. That way, I can use this laptop for time consuming render while I have my main computer doing something more useful, like work.

A bug in Painter XI.5

Previously I had problem running Painter XI.5 after upgraded it from XI. Yesterday I finally figured out the reason: I forgot to reset the default setting, as instructed at the web site right next to the download link! (So, yeah, my bad).
So now Painter XI.5 is running smoothly on my machine.

However, I guess I stumbled across a Painter XI.5 bug. Try this:
(1) Create a new document.
(2) Add a layer (Layer 1)
(3) Select the Canvas layer, and then select [Canvas][Canvas Sizes...]. Add 400 pixels to bottom.
(4) Select layer 1
(5) Now try to draw at the bottom of the newly added area.

You will find out that you CANNOT paint in that area. However, try save the document and then reopen again. That bottom area in the layer 1 in now accessible.

Is it a well known bug, of something I discovered and should be reported to Corel?